Wireless alarm system PNI SafeHouse PG300 communicator GSM 2G 3 sen

Wireless alarm system PNI SafeHouse PG300 communicator GSM 2G 3 sen - description

Remote control
The system has dedicated applications: PNI SafeHouse or iAlarm for Android and iOS operating systems through which you can make settings, monitor, but also the weapon or disarm the system. Also, you have in the package, but you can also add in addition, 2 remote controls through which you can control the system.

GSM 2G communicator
With the help of a 2G SIM card inserted in the alarm system you will receive burglary alerts and not only, instantly on your mobile phone in the form of SMS or voice call. This way you will be aware anytime and anywhere about the status of your system.
Attention, this alarm system works only with GSM 2G cards.

Wireless communication
The PNI PG300 alarm system is quickly mounted with a minimum of disturbance of the house due to the wireless /wireless communication between the unit and the desired sensors (movement, smoke, gas or magnetic contacts).

Alarm zones
The system is equipped with 10 alarm zones, 7 wireless, which can contain up to 10 detectors each, and 3 wired. The type of area can be programmed depending on the type of detectors allocated: with delay, fire, gas, door, etc. All these settings allow a clear definition of the function of each area and the mode of operation.

Basic system
The product comes in the package with all the necessary accessories for the immediate assembly and operation of a basic system for intrusion detection and warning. We find in the box: 3 wireless motion sensors, 1 magnetic wireles sensor, indoor siren, 2 wireless remote controls and 220V feeder for the control unit.

Motion detection
The A005 PNI sensor is designed to detect movement in the protected space and to transmit an alarm signal to a burglary warning system. It can only be used on the inside, because on the outside many false alarms can occur.

Wireless communication
PNI A005 is very easy to use and install because it does not require any cables and is compatible with almost any wireless burglary warning system, using a wireless communication with 433MHz frequency signals.

Autonomy
The sensor is powered by a simple 9V battery that gives it up to 1 year of autonomy. It is recommended to test the operation of the detector at an interval of several months.

Installation
You can mount the detector on the wall using a double-sided tape or by tapping into screws on a fixed support. The recommended height for mounting the detector is 2m from the floor.

---

Payment options

---

Delivery options

---

Shipping to countries