DEVICE FOR HYDROGENING

Offer's description

Device parameters:

Power supply: 230 V

Power consumption: 4 kW

Max. capacity: 1500 ltr / hour

Dimensions: 740 x 590 x 1040

Weight: 110 kg

CCS - 1500 enables precise adjustment of hydrogenation parameters to the type and capacity of the engine. As a result, the hydrogenation time and energy consumption are reduced, and the achieved effect allows to improve the condition of the engine and exhaust system components. CCS - 1500 can be used as a stationary device to perform services in a car repair shop, or placed in a company car, it can be used to perform services at the customer's site.
1. Hydrogenation of the engine
The device removes carbon deposits using a modern method, it is an effective machine for hydrogenation of engines
The removal of carbon deposits takes place without the need to disassemble any of the cleaned elements
By electronically dosing the hydrogen mixture, we force it into the engine through the intake system. As a result of pyrolysis, the carbon deposit turns into gas and is expelled through the exhaust pipe
-Pistons
- combustion chamber walls
-flirt particulate matter DPF / FAP
-exhaust manifold
-catalyst
-turbine on the flue gas side
-injectors-valves and seats
-piston rings
- engine bushings
Effects that result from using the treatment:
- average reduction of CO exhaust gases up to 70%, which may have a positive effect
the result of the periodic vehicle test
-reduces fuel consumption up to 15%
- better operation in the lower and upper RPM ranges
-smooth entering the rotation
-Quiet and smooth running of the engine
Symptoms that we can observe along with the depositing of carbon deposits:
-excessive smoking
- uneven engine operation
- too noisy engine operation
-reduction of engine power
- DPF / FAP filter clogged
- clogged catalytic converter
- the effect of the so-called "turbo lids"
The machine is one of the few on the market:
- has a European Certificate and was produced in the EU
- it is safe for the environment
- has power regulation depending on the engine capacity to ensure safe treatment
After cleaning, no oil or fuel are changed, no chemicals are used. Hydrogen, due to the fact that it is an energy fuel and very clean, does not leave any sediments, therefore it is best suited to raise the temperature in the engine.
It is recommended to hydrogenate every 50,000 km from new products, especially vehicles that have the advantage of urban cycles. Savings on parts that will not need to be replaced, for example, the EGR valve or the FAP filter mean that the cost of hydrogenation is disproportionate to what we may encounter when replacing the above-mentioned parts.
2. DPF FILTER REGENERATION
Particulate filter causing trouble?
Is the DPF / FAP filter light displayed on the dashboard?
Oil level above level?
Removing DPF is no longer necessary! Just regenerate it effectively!
If, as a result of long-term use of the car in urban conditions or a failure of the control system, the DPF particulate filter in your car has been completely blocked with soot particles - it can be regenerated.
The device will restore the DPF / FAP filter to full efficiency - removes soot and ashes up to 99%!
It guarantees the restoration of ~ 99% efficiency of the DPF filter.
The entire process takes place on the machine using an appropriate hydrodynamic cleaning method.
Model NO.
CCS1500
Function
Remove Carbon From Engine
Material
Stainless Steel
Condition
New
Main Market
Western Europe
Water Consumption
0.8L / H
Rated Power
4.5kw / H
AC Voltage
380V, 50 / 60Hz
Gross Weight
180kgs
Size
1070 * 670 * 1300mm
Delivery
3days After Payment
Carbon Cleaning Time
20mins
Carbon Cleaning Method
Oxyhydrogen Gas Feed Into Engine
Carbon Cleaning for
1.0-5.0 Petrol and Diesel Engines
Machine for
Car Garage, Car Workshop Carbon Cleaning Service
Trademark
Okay Energy
Transport Package
Standard Export Carton; 1set / Carton
Specification
gas output 1500L / H +/- 10%